Here is a list of hardware links that is mostly geared towards our Machines:
Aluminum Profiles:
1- The first is a product that just got off the ground in June of 2011. “Mark” refered us to them when we were still on the old SNYGRO website a few months ago . We submitting our idea . When the project got funded,we won a “Makers sponsor award” from them .
Makerslide by Bart Dring,We plan to incorporate this great carriage and slide into our kit soon.
We are very excited about this for the deveopment of our kits. This was developedon Kikstarter By Bart Dring, and is very well designed product , Please check it out …..MAKERSLIDE . . If all goes well with our prototype this will probably be our main collumn of choice .
2- http://www.bonlalum.com/pdf/products/sd-135.pdf
3-http://www.mknorthamerica.com/
4-http://www.faztek.net/new.html#
5-http://www.engineeredaluminumfab.com/profiles.html
7-http://www.8020.net/T-Slot-1.asp
9-Misumi
10-Maytec
11-Alufab
13-Easy Systems
14-80/20 Inc
Fasteners:
UV Block plastics sheeting :
1-http://www.rplastics.com/plexiglass-sheet-acrylic-11460-125irt24x48.html
2-http://www.e-tplastics.com/html/acrylics.html
3-http://k-mac-plastics.net/acrylite-op2-acrylic-sheet.htm
4-http://k-mac-plastics.net/data%20sheets/OP2%20UV%20Curves.htm
5-http://www.asmetec.de/uv-filters.htm
UV Glass for vatfloor-Let UV light through :
1-http://www.pgo-online.com/intl/katalog/curves/boro_kurve.html
2-http://www.pgo-online.com/intl/katalog/curves/pdfcurves/intl/B270UV250400115e.pdf
Enclosures/boxes:
1-http://www.solutionsdirectonline.com/hammond/pdf/hammond-enclosures-catalog.pdf
7:50 pm, June 8, 2011Gomish /
9-Bosch-Rexroth Extrusions
6:25 am, June 13, 2011Gomish /
Just a suggestion: Can you please also consider that some people do not have access to metal working machines (please include a writeup with only tools that can be bought in a hardware store) and the materials have to be available worldwide.
Thank You!
Fantastic job!
6:01 pm, June 14, 2011tj /
Gomish
That is the main reason we will supply the CS-1 in kitform (without the projector.)
1- You can use the main electronics and frame for whatever application you want to apply it to.
2-Only assembly required(or order assembled).You know it will work smoothly right from the start.
3-you can use your own available type of light source for imaging.
4-Also you can build the CS_1 with hand tools from our plans that will be open sourced ,it will just take a long time and you need some hand and tool skills.
TJ.